|
|
Relay modules
|
Our DIN rail relay modules
offer a simple cost-effective solution to applications that do not require
great complexity.
|
|
|
 |
|
|
|
CONVERTER BOARDS IN EXTRA-FLAT COMPACT
MODULE FOR DIN RAIL
|
|
|
|
Ref.
|
Image
|
Function
|
Descripction
|
|
|
|
XRD2/4/8
|
|
|
The XRD2 / 4/8 module is a driver with 2/4/8
low current 0-10V analog inputs, which allows activating 2/4/8 relay
outputs with voltages from 1.5 V. It has indicator LEDs the status of each
relay.
•
Specifications XRD2/4/8 .
|
|
|
|
XRA4/8
|
|
|
The XRA4 / 8 module allows activating the
output of up to 4 relays using 24 / 12Vac signals with common. It has LEDs
indicating the status of each relay.
•
Specifications XRA2/4/8.
|
|
|
|
XRC4/8
|
|
|
The XRC4 / 8 module allows activating the
output of up to 4 relays (SPST / SPDT) through 24 / 12Vdc signals with
common. It has LEDs indicating the status of each relay.
•
Specifications XRC2/4/8 .
|
|
|
|
XCAD1x4
|
|
|
Converter module from a 0-10Vdc analog input
to 4 relay output (16 combinations). Allows the use of PLC analog output
in digital relay outputs.
•
Specifications
XCAD .
|
|
|
|
XRM8
|
|
|
4/8 relay module controlled through ModBus RTU
RS485. Address configuration through microswitches. It has LEDs indicating
the status of each relay.
•
Specifications
XRM8 .
|
|
|
|
XNTC4x1-C
|
|
|
4 digital input card and an impedance analog
output. Allows to convert 4 digital inputs into a simulated impedance
analog NTC output.
•
Specifications
XNTC4x1-C .
|
|
|
|
XMED4x1-C
|
|
|
4 digital input card and an analog output.
Allows you to convert 4 digital inputs into a PT1000 simulated impedance
analog output.
•
Specifications
XMED4x1-C .
|
|
|
|
DIN RAIL CONVERTER MODULES
|
|
|
|
Ref.
|
Image
|
Function
|
Description
|
|
|
|
XRD2/4-C
|
|
|
The XRD2 / 4 module is a driver with 2/4/8 low
current 0-10V analog inputs, which allows activating 2/4/8 relay outputs
with voltages from 1.5 V. It has LEDs that indicate the status of each
relay. In a complete DIN rail box.
•
Specifications
XRD2/4-C .
|
|
|
|
XRA2/4-C
|
|
|
The XRA24 / 8 module allows activating the
output of up to 4 relays using 24 / 12Vac signals with common. It has LEDs
indicating the status of each relay. In a complete DIN rail box.
•
Specifications
XRA2/4C
|
|
|
|
XRC2/4-C
|
|
|
The XRC4 / 8 module allows activating the
output of up to 4 relays through 24 / 12Vdc signals with common. It has
LEDs indicating the status of each relay. In complete DIN rail box.
•
Specifications
XRA2/4C
|
|
|
|
CRE1
|
|
|
0-10Vdc / 4-20mA Converter Module set by set
point (pushbuttons). to output by relay. Instantly reports the value of
the signal and has mathematical functions depending on the input.
•
Specifications
CRE1 .
|
|
|
|
XCS
|
|
|
Current sensor (Electo Hall sensor) 5A and 10A
with analog output 0-10V, 4-20mA or MosBus RTU RS485 communication for din
rail. Displays the instantaneous value and enables the relay to be
activated according to offset.
•
Specifications
XCS .
|
|
|
|
RS232-ISO
|
|
|
3KV RS232 isolator. It allows to electrically
isolate RS232 ports (TX, RX, RTS and CTS) with up to 512Kbds. RJ45
connectors.
•
Specifications
RS232-ISO .
|
|
|
2012
ASP Electronic S.A., todos los derechos reservados © - info@asp-electronic.com
|
